UAZ Hunter Maintenance Tips & Common Replacement Parts Guide
The UAZ Hunter: Built Tough, But It Still Needs Care
The UAZ Hunter (UAZ-315195) is one of the most capable off-road vehicles ever produced — a direct descendant of the legendary UAZ-469 that has served military, agricultural, and adventure purposes for decades. Its rugged ladder-frame chassis, solid axles, and high ground clearance make it nearly unstoppable in the field.
But like any working vehicle, the Hunter requires regular maintenance and occasional part replacement to stay in peak condition. This guide covers the most important maintenance tasks and the parts you'll need to keep your UAZ Hunter running strong.
Regular Maintenance Schedule
Every 5,000 km
- Engine oil and filter change
- Check and top up gearbox and transfer case oil
- Inspect brake fluid level
- Lubricate all grease nipples (front axle, steering joints, propshafts)
Every 10,000 km
- Replace air filter
- Inspect and adjust brakes
- Check wheel bearing play
- Inspect steering linkage and tie rod ends
- Check coolant level and hose condition
Every 20,000 km
- Replace spark plugs (petrol engines)
- Replace fuel filter
- Inspect and replace drive belts if worn
- Check and adjust valve clearances
Most Commonly Replaced Parts
Exterior & Body Parts
The UAZ Hunter's exterior takes a beating off-road. The radiator grille is one of the most frequently replaced cosmetic parts — both for damage repair and for giving the vehicle a refreshed look.
Our Plastic Trim Radiator Grille for UAZ Hunter / UAZ 469 / UAZ 3151 is a direct-fit replacement that restores the factory look. If you prefer a more aggressive appearance, check out our "Angry" Style Radiator Grille — a popular upgrade among Hunter owners.
Mirrors
Off-road driving and tight forest tracks are hard on side mirrors. Replacing them is a quick job that makes a big difference to visibility and safety.
Our Side Mirror Set (2 pcs) for UAZ Hunter / UAZ 469 / UAZ 3151 is a matched pair designed for direct fitment on all Hunter variants.
Suspension & Steering
The Hunter's solid axle suspension is robust but the rubber bushings, shock absorbers, and steering components wear over time — especially with regular off-road use. Signs of wear include wandering steering, clunking over bumps, and uneven tyre wear.
Brakes
The Hunter uses drum brakes all around on most variants. Brake shoes and wheel cylinders are the most commonly replaced brake components. Inspect them every 10,000 km and replace if the lining thickness is below 1.5mm.
Engine Gaskets & Seals
Older UAZ engines are known for oil seepage around the valve cover, sump, and rear main seal. Replacing these gaskets is inexpensive and prevents more serious damage from oil loss.
Tips for Sourcing UAZ Hunter Parts
- Always confirm your exact model year — the Hunter has been produced since 2003 and some parts differ between early and late production runs.
- Check compatibility with UAZ 469 and UAZ 3151 — many parts are shared across these models, giving you more sourcing options.
- Prefer OEM-spec or quality aftermarket parts — cheap imitations may not meet the tolerances required for off-road reliability.
Keep Your Hunter Ready for Anything
Regular maintenance is the best investment you can make in your UAZ Hunter. A well-maintained Hunter will outlast almost any modern SUV in demanding conditions.
Browse our full range of UAZ Hunter parts and accessories to find everything you need for your next service or upgrade.